How to load paper into verifone VX510 / Omni 3730 credit card terminal
If you are looking at the top of the Verifone vx510 / omni 3730 (Same instructions apply to the vx510le and omni 3730le) you will see a blue paper cover. Hit the button on the right hand side to release the cover and open up the lid.
Then drop the roll of paper into the credit card terminal so the paper rolls out from the bottom towards the front of the machine. Make sure you are using the correct size paper. Most Verifone terminals us 2 and 1/4″ wide by 85′ long thermal paper.
Then close the paper lid. Mke sure to peel off about 10″ of the roll before you try processing credit cards. The first part of the roll is usually not able to print well.
Now you are all set to run credit card transactions on your Verifone vx510 / omni 3730! If you would like to learn more about merchant services or verifone credit card terminals follow the link!
This entry was posted on Friday, May 13th, 2011 at 8:18 pm and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response. or trackback from your own site.