How to reset audi service indicator

Reset service light indicator Audi A3

Reset service light indicator Audi A3

Reset service light indicator Audi A3, from year: 1996, 1997, 1998, 19992000, 2001, 2002, 20032003, 2004, 2005, 2006, 2007, 2008, 2009

Reset service light indicator Audi A3, from year:  1996, 1997, 1998, 1999.

  1. If the service is due on these vehicles, when the key is turned to position 2. One of the dashboard displays will show, Service INSP, INSP1 or INSP2 for Fixed interval services. And, SERVICE OEL or OIL, for the Oil Service interval.
  2. The oil service light reset procedure is as follows. Start with the ignition turned OFF Press and hold the button on the right side of the display. While turning the ignition on (position 2) Service OEL / OIL, should be displayed.
  3. Release the button on the right Pull out the button on the left side of the display until the service prompt is cleared.
  4. The display should now read ,—.
  5. Release the button on the left then to access and reset the service information.
  6. Push the button on the right briefly Service INSP, should show on the dash.
  7. Pull out the button on the left side of the display until the service prompt is cleared.
  8. The display should now read ,—.
  9. Release the button on the left.

Reset service light indicator Audi A3, from year:  2000, 2001, 2002, 2003.

  1. For Fixed Interval servicing, you can use the following procedure.
  2. Start with the ignition turned OFF Press and hold the button on the right (1) side of the display. While turning the ignition on (position 2) SERVICE IN xxx Miles

    / Kilometres or SERVICE. Should be displayed on the dashboard.

  3. Release the button on the right (1).
  4. To reset on the existing service schedule. Press and hold the button on the left (2) side of the display until the NEW distance or time value appears
  5. Release the button on the left (2).
  6. Turn off the ignition.

Reset service light indicator Audi A3, from year:  2003, 2004, 2005, 2006, 2007, 2008, 2009.

  1. For Fixed Interval servicing, you can use the following procedure.
  2. Start with the ignition turned ON (position 2). But with the engine OFF Pull out and hold the button on the right side of the display until SERVICE appears on the display.
  3. Release the button on the right, then within 5 seconds pull the button out and hold it again.
  4. Release the button when the display shows ,barm or SERVICE IN xxxx Miles / Kilometres, xxxx days.
  5. Turn off the ignition.

That it is the full procedure how to reset service light indicator Audi A3. If you like to reset any maintenance oil light after an oil change, or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Audi cars, or any error which appears on the display, write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly or if you would have anything to add, for us every opinion counts.

Source: resetservicelight.com

Category: Forex

Similar articles: