How Does a Transformer Work?
A transformer is an electrical device that takes electricity of one voltage and changes it into another voltage. You'll see transformers at the top of utility poles and even changing the voltage in a toy train set.
Basically, a transformer changes electricity from high to low voltage using two properties of electricity. In an electric circuit, there is magnetism around it. Second, whenever a magnetic field changes (by moving or by changing strength) a voltage is made. Voltage is the measure of the electric force or "pressure" that "pushes" electrons around a circuit. (You may also want to read Chapter 7 on the Electrical transmission system in The Energy Story.
If there's another wire close to an electric current that is changing strength, the current of electricity will also flow into that other wire as the magnetism changes.
A transformer takes in electricity at a higher voltage and lets it run through lots of coils wound around an iron core. Because the current is alternating, the magnetism in the core is also alternating. Also around the core is an output wire with fewer coils. The magnetism changing back and forth makes a current in the wire. Having fewer coils means less voltage. So the voltage is "stepped-down."
Transformers on the Electrical Grid
Let's look at the electricity that comes to your home. When electricity moves from a power plant it is put into a very high voltage to be able to travel long distances. The high voltage lines can be as high 155,000 to 765,000 volts to
travel many hundreds of miles.
In order for your home or a store to use the electricity, it has to be at a lower voltage than on the long-distance lines. So, the electricity is "stepped-down to a lower level using a transformer. This lower voltage electricity is put into the local electric wires at a substation. The substation breaks the larger amount of power down into smaller pieces at lower voltage. It then is stepped down again and again.
Once smaller transformers take that voltage down to usually 7,200, the power leaves this substation.
In your neighborhood, a transformer on top of a utility pole, or one connected to underground wires, transforms the 7,200 volts into 220-240 volts. This is then sent into your home over three wires. The three wires go through the electric meter, which measures how much electricity you use. One of the three wires is the ground, and the other two are the positives.
Some of the electrical appliances in your home use the 220-240 volts. These are things like a water heater, stove and oven, or air conditioner. They have very special connections and plugs. Other devices, like your TV or computer only use one-half of the electricity -- 110-120 volts.
In a toy train set, the voltage is reduced even more from 110-120 and is changed from alternating current into direct current.
Some businesses use higher voltage power to run big machines. So, they don't need to have the voltage reduced as much.
Other Places to Visit: